ماژول ترموستات دیجیتال XY-T01 دارای نمایشگر LCD

Parameters:
Power supply: DC 6.0-30V or 5V Micro USB.
Measurement input: NTC10K/B3950
Refresh rate: 0.5 seconds.
Output Type: Relay Output 10A
Probe type: waterproof probe, length: 0.5 m.

Set parameters:
Working mode / setting temperature / hysteresis temperature setting:
1. In the running interface, briefly press the SET button to enter the quick setting interface.
2. After entering the quick setting interface, change the parameter to be set (working mode/setting temperature/hysteresis temperature) by briefly pressing the SET button.
3. Change the parameter value by pressing up or down after selecting the parameter.
4. Press and hold the SET button for more than 3 seconds, or do not have a button for 6 seconds, it will save the parameters and exit the quick setting interface automatically.

ALA/OPH/OFE set (alarm temperature / delay start setting / temperature correction):
1. Press and hold the SET button for more than 3 seconds, enter the parameter setting interface.
2. After entering the parameter setting interface, change the parameter to be set (alarm temperature/delay start setting/temperature correction) by briefly pressing the SET button.
3. Use the up down button to change the parameter.
4. Press and hold the SET button for more than 3 seconds, or do not have a button for 6 seconds, it will save the parameters and leave the parameter setting interface automatically.

Package includes:
1 x electronic thermostat regulator.
1 x Waterproof Sensor Probe