ماژول فیلتر EMI ریپل DC خط تغذیه 60 ولت 6 آمپر (مناسب آمپلی فایر های کلاس D)
کد محصول :
2 دیدگاه
ماژول فیلتر DC خط تغذیه 60 ولت 6 آمپر (مناسب آمپلی فایر های کلاس D)
برای خرید تعداد بالاتر از موجودی با 08736233889 تماس بفرمائید
قیمت :
2,425,592 ریال
13 در انبار
فیلتر EMI تغذیه DC با ولتاژ تا 60 ولت و جریان 6 آمپر ، یک قطعه الکترونیکی حیاتی است که برای حذف نویز و تداخلات الکتریکی از منابع تغذیه DC استفاده میشود. این فیلتر با طراحی دقیق و استفاده از قطعات با کیفیت بالا، عملکردی بینظیر در کاهش نویز و بهبود کیفیت سیگنال ارائه میدهد. این ماژول با حذف نویزهای فرکانس بالا و پایین الکترومغناطیسی ، از آسیب رسیدن به قطعات حساس الکترونیکی جلوگیری میکند و طول عمر آنها را افزایش میدهد. این محصول، انتخابی ایدهآل برای استفاده در سیستمهای رباتیک، اتوماسیون صنعتی، تجهیزات پزشکی و سایر کاربردهایی است که نیاز به منبع تغذیه دیسی پایدار و بدون نویز دارند.
این ماژول برای تغذیه آمپلی فایر های کلاس D بهینه شده است به طوریکه آن را باید در مسیر تغذیه برد قرار داد .
Introduction
The board adopts the working principle of LC differential common mode, which can suppress the interference in the switching power supply or other DC power supply, reduce the ripple of the power supply, reduce the interference caused by the power supply, and can be used for the low-voltage DC (0V~50V) power supply circuit. Such as power amplifier boards, vehicle equipment, industrial control boards, DC appliances, and so on.
The circuit is more flexible to use. When the suppression effect is not up to the requirement, it can be connected in multiple stages to enhance the suppression capability. When the working current of the board does not meet the demand, multiple blocks can be connected in parallel to increase the output current. For the positive and negative power supply. The circuit board can be superimposed in two pieces to form a positive and negative power interference suppression board.
DC power filter board, digital power amplifier interference suppression board, automotive power supply, EMI suppression, current 6A max, suitable for TPA3116 type of machine current, so that the power input is more pure, so that the power amplifier noise is lower.
Specification
Vin+: input positive end
Vin-: input negative
Vout+: output positive end
Vout-: negative output

1 دیدگاه برای ماژول فیلتر EMI ریپل DC خط تغذیه 60 ولت 6 آمپر (مناسب آمپلی فایر های کلاس D)
محسن –
سلام مگه می شه! خازن الکترولیت تو فیلتر EMI!
KansTens –
سلام . این فیلتر مناسب خط تغذه آمپلی فایر های کلاس D هست و خازن های الکترولیتی برای ریپل های DC و ریپل های با فرکانس پایین جوابگو هستن . ولی برای فرکانس بالا خیر . تولید کننده چینی مادامی که قطعه ای ارزان تر جوابگو باشد از ان استفاده خواهد کرد .