ماژول رله 12 ولت 8 کانال مدل برد قرمز (Active High/Low)

ماژول فوق شامل 8 رله تک کنتاکت با خروجی های NC و NO است  ولتاژ تغذیه این برد 12 ولت است . هر رله دارای مدار ایزولاتور اپتوکوپلری خود است که عملکرد بدون نویز و حفاظت شده را تضمین میکند . این ماژول با هردو حالت Active Low و High قابل کنترل است و برای تغییر این حالت ها از یک جامپر استفاده شده است .

مشخصات :

ولتاژ تغذیه 12V DC

دارای 8 رله 10A 250VAC / 10A 30VDC با خروجی ای NC و NO

ورودی به صورت Active Low/High

• LED Indicator: Includes an indicator LED to show relay activation status
• Mounting: mounting holes
• Module Interfaces:
• DC+: Positive power supply (by relay voltage power supply)
• DC-: Connect power negative
• IN1: 1 channel signal to trigger the end , you can set a high or low level control relay
• IN2: 2 -channel signal to trigger the end , you can set a high or low level control relay
• IN3: 3 -channel signal to trigger the end , you can set a high or low level control relay
• IN4: 4 -channel signal to trigger the end , you can set a high or low level control relay
• IN5: 5 channel signal to trigger the end , you can set a high or low level control relay
• IN6: 6 -channel signal to trigger the end , you can set a high or low level control relay
• IN7: 7 -channel signal to trigger the end , you can set a high or low level control relay
• IN8: 8 -channel signal to trigger the end , you can set a high or low level control relay
• Relay outputs: (for each channel)
• NO: Normally open relay interface
• COM: Common Interface Relays
• NC: Normally closed relay interface
• Dimensions: 50mm x 140mm x 18.5mm

Features of 8-Channel Relay Module – 12V (High and Low Level Trigger):

• Octal Channels: Provides eight independent relay channels for simultaneous control of eight circuits.
• Selectable Trigger Level: The jumpers allow you to choose between HIGH or LOW trigger levels for each channel, enhancing compatibility with different control devices.
• High Load Capacity: Capable of switching high-voltage and high-current loads for versatile applications.
• Usage Tip:
• Ensure that the voltage and current ratings of the relay module match the requirements of the loads you intend to control. Always follow safety guidelines when working with high-voltage circuits.
• The module can be set to high or low-level trigger by jumper:
• A. When the jumper is shorted to LOW, it is triggered at low level.
• B. When the jumper is shorted to high, the trigger is high.
• Caution:
• Exercise caution when working with high-voltage circuits, and ensure proper isolation and protection to prevent electrical hazards. Double-check the wiring and connections before applying power to the relay module.