ماژول رله 5 ولت دو کاناله
کد محصول :
بدون دیدگاه
ماژول رله 5 ولت دو کاناله
برای خرید تعداد بالاتر از موجودی با 08736233889 تماس بفرمائید
قیمت :
83,900 تومان
239 در انبار
این ماژول امکان کنترل دو رله را توسط میکروکنترلر های مختلف فراهم می کند . به دلیل توان پایین پین های میکروکنترلر ها ، امکان اتصال رله به صورت مستقیم به پین آن ها امکان پذیر نیست . این ماژول با وجود مدار محافظ و مدار بافر این امکان را فراهم می کند . رله های این ماژول امکان سوئیچ 220 ولت تا 10 آمپر را دارند لذا این ماژول امکان کنترلر لوازمی همچون الکتروموتر های برق شهری ، لامپ های 220 ولت و غیره را فراهم می کند . این برد دارای مدار محافظ اُپتوایزولاتور است همچنی قسمت کنتاکت های رله ها از سایر اجزای مدار جدا شده اند لذا نویزی نخواهند داشت .
مشخصات :
دو رله 220V-AC /30V-DC 10A
ولتاژ تغذیه مدار 5V
ولتاژ کنترل رله ها 3.3V تا 5.5V
کنتاکت های خروجی هر کدام دارای تریمنال پیچی
هر رله دارای خروجی NO و NC
امکان کنترل توسط آردوینو ، PIC و…
Introduction
This is a Low-level 5V 2-channel relay interface board, and each channel needs a 15mA driver current. It can be used to control various appliances and equipment with large current.
It is equipped with high-current relays that work under AC 250V 10A or DC 30V 10A. It includes a standard interface that can be controlled directly by the microcontroller.
The relay uses high-quality single-pole relays and double throw.
It featured A common end, a normally open end, and a normally closed-end.
It also consists of Optocoupler isolation with good anti-interference Low-level pull-in, high-level release.
The status indicator is on when the inverter is closed, and the status indicator is off when released.
VCC is the system power supply, and JD_VCC is the relay power supply. The default working voltage is 5V relay which plugs in the jumper cap.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.