ماژول شارژر تک سل TP4056 micro USB Protection

این ماژول یک شارژر تک سل با چیپ TP4056 است که می تواند باتری های Li Io یا لیپو تک سل را با حداکثر جریان 1A شارژ کند . این نسخه دارای سه چیپ بوده که مدار محافظ شارژ نیز دارد به طوریکه پس از شارژ کامل باتری خروجی را قطع می کند .

مشخصات :

ولتاژ ورودی 5V تا 8V

دارای کانکتور microUSB

سیگنال خروجی شارژ کاملا خطی

ماژول سه چیپ دارای مدار محافظ شارژ

جریان خروجی  1A

دارای LED برای نشان دادن حالت شارژ و فول شدن باتری

ابعاد 28mmx17mm

مناسب شارز باتری های لیتیومی  18650

Description :

This TP4056 Battery Charging Module (Micro USB) is for Li-Ion Battery Charging. It supports USB Micro with Current Protection, and is perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Its based on the TP4056 charger IC and DW01 battery protection IC and provides 1A Charge Current.

When the battery voltage drops below 2.4V the TP4056 Battery Charging Module IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection.

Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.

The TP4056 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. Its SOP package and low external component count make the TP4056 ideally suited for portable applications. It can work within USB and wall adapter.

No blocking diode is required due to the internal PMOSFET architecture and have prevent to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The TP4056 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.

TP4056 Other features include current monitor, under voltage lockout, automatic recharge and two status pin to indicate charge termination and the presence of an input voltage

Features:

• TP4056 Charging IC
• Led indicator: Red is charging Green is fully charged
• Input Voltage: 4V ~ 8V
• Preset 4.2V Charge Voltage with 1.5% Accuracy
• Automatic Recharge
• Constant-Current/Constant-Voltage
• Charges Single Cell Li-Ion Batteries Directly from USB Port

Applications:

• Cellular Telephones, PDAs, GPS
• Charging Docks and Cradles
• Digital Still Cameras, Portable Devices
• USB Bus-Powered Chargers